logo
Домой > продукты >
Модуль цифров И о
>
Ален-Брэдли 1747-CP3, кабель программиста SLC 500, SLC 5/02, 5/03, 5/04, 5/05

Ален-Брэдли 1747-CP3, кабель программиста SLC 500, SLC 5/02, 5/03, 5/04, 5/05

Детали продукта:
Место происхождения: США
Фирменное наименование: AB
Номер модели: 1747-КП3
Подробная информация
Место происхождения:
США
Фирменное наименование:
AB
Номер модели:
1747-КП3
Бренд:
Ален-Брэдли
Модель:
1747-CP3
Серия:
SLC 500
Тип кабеля:
Кабель программиста
Длина:
118 дюймов (3 метра)
Совместимые процессоры:
SLC 5/02, 5/03, 5/04, 5/05
Течение Backplane (5 вольт):
800 milliamps
Рабочая температура:
32-140 Градус Фаренгейта (0-60 Градус цельсия)
Выделить:

High Light

Выделить:

5V DC цифров я модуль o

,

PLC изолировал модуль выхода реле

,

Модуль микрокомпьютера PCM полупроводниковый

Информация о торговле
Количество мин заказа:
1
Цена:
лично переговорить
Упаковывая детали:
Новый в первоначальной коробке
Время доставки:
5-8 дней работы
Условия оплаты:
T/T
Поставка способности:
100
Характер продукции

AB 1747-CP3 , SLC 500 Programmer Cable , SLC 5/02, 5/03, 5/04, 5/05

Technical Specifications for 1747-CP3

Manufacturer Rockwell Automation
Brand AB
Part Number/Catalog No. 1747-CP3
Series SLC 500
Cable Type Programmer Cable
Length 118 inches (3 meters)
Compatible Processors SLC 5/02, 5/03, 5/04, 5/05
Backplane Current (5 Volts) 800 milliamps
Operating Temperature 32-140 Fahrenheit (0-60 Celsius)
Cable Belden 9463
Connectors 6-Pin Phoenix Connector
Weight 0.37 pounds (168 grams)
Dimensions 5.72 x 1.37 x 5.15 inches
Operating Temperature 0-60 Celsius

About 1747-CP3

The AB 1747-CP3 is a programmer cable for the SLC 5/03 and the 5/04 Modular Programmable Controllers. This cable connects 5/03 & 5/04 RS232 Communications Port to the DTE Device (Computer). The AB 1747-CP3 has an internal jumper on each end. The 1747-CP3 also connects the PanelView Series Component Terminal to the SLC and MicroLogix controllers. It is also called the 9-pin D Shell-to-9-pin D Shell Null Modem Cable. The length of this cable is around 3 m (9.8 ft) and it has been tested by several organizations. This cable follows the Council Directive 89/336 / EEC Electromagnetic Compatibility (EMC). This cable also follows some Electromagnetic Compatibility (EMC) standards. The AB 1747-CP3 has passed the EN 50081-2 EMC - Generic Emission Standard, Part 2 - Industrial Environment standard, the EN 50082-2 EMC – Generic Immunity standard, and the Part 2 - Industrial Environment standard. To avoid damage to the ESD on a computer, always connect to a properly designed DH-485 device or interface before inserting the USB cable into the computer's USB port.

The AB 1747-CP3 is intended for use in an industrial environment. It follows the Council Directive 73/23/EEC Low Voltage, Part 2 – Equipment requirements and tests. This cable has met the safety requirements that have been set. Please refer to the Wiring and Installation Guide for Industrial Automation, 1770-IN041. If you experience problems with this cable within the first 24 hours of installation, do not forcefully remove it, as this may cause damage.


Ален-Брэдли 1747-CP3, кабель программиста SLC 500, SLC 5/02, 5/03, 5/04, 5/05 0

Ален-Брэдли 1747-CP3, кабель программиста SLC 500, SLC 5/02, 5/03, 5/04, 5/05 1